4.10. Board setting#

See also

Caution

This page settings will persist even after rebooting.

By using Board setting tab, you can set and check the status of the GMSL2-GbE conversion module.

  • Number of the connected cameras and its availability. (Read only)

  • Setting the number of connected cameras

  • Reboot GMSL 10GbEthernet Board

  • IP address for login. (Read / Write)

  • Source IP address for image data output (Read / Write) (Accelerated data Interfae: Source)

  • Destination IP address for image data output (Read / Write) (Accelerated data Interfae: Remote)

  • UDP port for each camera (Read / Write)

../../_images/board_setting_gui.png

Fig. 4.13 Board setting GUI tab#