TIER IV Automotive HDR Camera

• 1. TIER IV Automotive HDR Camera Getting Started Guide
  • 1.1. Support List
  • 1.2. Installation Guide for NVIDIA Jetson AGX Orin Developer Kit
  • 1.3. Installation Guide for ADLINK RQX-59G
  • 1.4. Installation Guide for Vecow EAC-5000
  • 1.5. Installation Guide for Connect Tech Anvil
  • 1.6. Installation Guide for Syslogic RML-A4AGX
  • 1.7. Camera Operation and Configuration Guide
• 2. Camera Control Tool User Manual (t4cam-ctrl)
  • 2.1. Requirements
  • 2.2. Installation
  • 2.3. CUI Tool
  • 2.4. GUI Tool
• 3. Hardware Reference Manuals
  • 3.1. C1 Camera Hardware Reference Manual
  • 3.2. C2 Camera Hardware Reference Manual
  • 3.3. C3 Camera Hardware Reference Manual
• 4. FAQ
  • 4.1. Can I adjust the camera settings such as exposure, gain, and shutter speed?
  • 4.2. What are the options for C1 camera Field of View (FOV)?
  • 4.3. What are the options for C2 camera Field of View (FOV)?
  • 4.4. What is the camera size of C1 for each lens?
  • 4.5. What is the camera size of C2 for each lens?
  • 4.6. Can I change the frame rate?
  • 4.7. What is the shutter type?
  • 4.8. Does the camera have a zoom function?
  • 4.9. Can I switch the shutter mode between rolling and global?
  • 4.10. What’s the maximum length of the cable I can use?
  • 4.11. Can I use a different ECU other than the recommended one?
  • 4.12. What is the image delay from the camera to the ECU?
  • 4.13. Is it possible to communicate and supply power with PoE?
  • 4.14. Can I use the cameras with a USB interface?
  • 4.15. Is it compatible with PTP IEEE1588?
  • 4.16. How do I install the camera driver?
  • 4.17. How can I inquire about products and services?
  • 4.18. What should I do if the product is defective or malfunctions?
  • 4.19. What is the operating temperature range of the cameras?
  • 4.20. Is exterior CAD data available?
  • 4.21. What environmental standards do the cameras comply with?
  • 4.22. Can I use the C1 and C2 at the same time, with the same ECU?
  • 4.23. Can I use the Raspberry pi to receive the data from the TIER IV cameras by using GMSL2-USB3.0 converter?
  • 4.24. Can I fix the relationship between the GMSL port number and the device name?
  • 4.25. Some cameras don’t start streaming image when I connect multiple (for instance, 8) cameras. This happens occasionally
  • 4.26. I would like to know which ECU I can use with TIER IV cameras and from who I should get support.
  • 4.27. I can’t play videos in VLC media player
  • 4.28. Is it possible to obtain the internal parameters and distortion correction coefficients used during camera calibration from the camera?
  • 4.29. When using NVMe storage for root system(M.2 SSD)
  • 4.30. I see I2C write errors in kernel messages after driver installation