Skip to main content
Ctrl+K
Logo image

Edge.Auto Documentation

Site Navigation

  • TIER IV Automotive HDR Camera
  • Sensor Fusion System
  • GMSL2-10GbE Conversion Module
  • GMSL2-USB3.0 Conversion Kit
  • Knowledge Base
  • Downloads
  • TIER IV ADK
  • TIER IV

Site Navigation

  • TIER IV Automotive HDR Camera
  • Sensor Fusion System
  • GMSL2-10GbE Conversion Module
  • GMSL2-USB3.0 Conversion Kit
  • Knowledge Base
  • Downloads
  • TIER IV ADK
  • TIER IV

Section Navigation

  • 1. TIER IV Automotive HDR Camera Getting Started Guide
    • 1.1. Support List
    • 1.2. Installation Guide for NVIDIA Jetson AGX Orin Developer Kit
    • 1.3. Installation Guide for ADLINK RQX-59G
    • 1.4. Installation Guide for Vecow EAC-5000
    • 1.5. Installation Guide for Connect Tech Anvil
    • 1.6. Installation Guide for Syslogic RML-A4AGX
    • 1.7. Camera Operation and Configuration Guide
  • 2. Camera Control Tool User Manual (t4cam-ctrl)
  • 3. Hardware Reference Manuals
    • 3.1. C1 Camera Hardware Reference Manual
    • 3.2. C2 Camera Hardware Reference Manual
    • 3.3. C3 Camera Hardware Reference Manual
  • 4. FAQ
    • 4.1. Can I adjust the camera settings such as exposure, gain, and shutter speed?
    • 4.2. What are the options for C1 camera Field of View (FOV)?
    • 4.3. What are the options for C2 camera Field of View (FOV)?
    • 4.4. What is the camera size of C1 for each lens?
    • 4.5. What is the camera size of C2 for each lens?
    • 4.6. Can I change the frame rate?
    • 4.7. What is the shutter type?
    • 4.8. Does the camera have a zoom function?
    • 4.9. Can I switch the shutter mode between rolling and global?
    • 4.10. What’s the maximum length of the cable I can use?
    • 4.11. Can I use a different ECU other than the recommended one?
    • 4.12. What is the image delay from the camera to the ECU?
    • 4.13. Is it possible to communicate and supply power with PoE?
    • 4.14. Can I use the cameras with a USB interface?
    • 4.15. Is it compatible with PTP IEEE1588?
    • 4.16. How do I install the camera driver?
    • 4.17. How can I inquire about products and services?
    • 4.18. What should I do if the product is defective or malfunctions?
    • 4.19. What is the operating temperature range of the cameras?
    • 4.20. Is exterior CAD data available?
    • 4.21. What environmental standards do the cameras comply with?
    • 4.22. Can I use the C1 and C2 at the same time, with the same ECU?
    • 4.23. Can I use the Raspberry pi to receive the data from the TIER IV cameras by using GMSL2-USB3.0 converter?
    • 4.24. Can I fix the relationship between the GMSL port number and the device name?
    • 4.25. Some cameras don’t start streaming image when I connect multiple (for instance, 8) cameras. This happens occasionally
    • 4.26. I would like to know which ECU I can use with TIER IV cameras and from who I should get support.
    • 4.27. I can’t play videos in VLC media player
    • 4.28. Is it possible to obtain the internal parameters and distortion correction coefficients used during camera calibration from the camera?
    • 4.29. When using NVMe storage for root system(M.2 SSD)
    • 4.30. I see I2C write errors in kernel messages after driver installation
  • TIER IV Automotive HDR Camera
  • 4. FAQ
  • 4.4. What is the camera size of C1 for each lens?

4.4. What is the camera size of C1 for each lens?#

Please refer the Mechanical specifications in hardware reference manual.

previous

4.3. What are the options for C2 camera Field of View (FOV)?

next

4.5. What is the camera size of C2 for each lens?
Last updated on 2026-06-15

© Copyright 2023, TIER IV.