4. FAQ

• 4.1. Can I adjust the camera settings such as exposure, gain, and shutter speed?
• 4.2. What are the options for C1 camera Field of View (FOV)?
• 4.3. What are the options for C2 camera Field of View (FOV)?
• 4.4. What is the camera size of C1 for each lens?
• 4.5. What is the camera size of C2 for each lens?
• 4.6. Can I change the frame rate?
• 4.7. What is the shutter type?
• 4.8. Does the camera have a zoom function?
• 4.9. Can I switch the shutter mode between rolling and global?
• 4.10. What’s the maximum length of the cable I can use?
• 4.11. Can I use a different ECU other than the recommended one?
• 4.12. What is the image delay from the camera to the ECU?
• 4.13. Is it possible to communicate and supply power with PoE?
• 4.14. Can I use the cameras with a USB interface?
• 4.15. Is it compatible with PTP IEEE1588?
• 4.16. How do I install the camera driver?
• 4.17. How can I inquire about products and services?
• 4.18. What should I do if the product is defective or malfunctions?
• 4.19. What is the operating temperature range of the cameras?
• 4.20. Is exterior CAD data available?
• 4.21. What environmental standards do the cameras comply with?
• 4.22. Can I use the C1 and C2 at the same time, with the same ECU?
• 4.23. Can I use the Raspberry pi to receive the data from the TIER IV cameras by using GMSL2-USB3.0 converter?
• 4.24. Can I fix the relationship between the GMSL port number and the device name?
• 4.25. Some cameras don’t start streaming image when I connect multiple (for instance, 8) cameras. This happens occasionally
• 4.26. I would like to know which ECU I can use with TIER IV cameras and from who I should get support.
• 4.27. I can’t play videos in VLC media player
• 4.28. Is it possible to obtain the internal parameters and distortion correction coefficients used during camera calibration from the camera?
• 4.29. When using NVMe storage for root system(M.2 SSD)
• 4.30. I see I2C write errors in kernel messages after driver installation