Skip to main content
Ctrl+K
Logo image

Edge.Auto Documentation

Site Navigation

  • TIER IV Automotive HDR Camera
  • Sensor Fusion System
  • GMSL2-10GbE Conversion Module
  • GMSL2-USB3.0 Conversion Kit
  • Knowledge Base
  • Downloads
  • TIER IV ADK
  • TIER IV

Site Navigation

  • TIER IV Automotive HDR Camera
  • Sensor Fusion System
  • GMSL2-10GbE Conversion Module
  • GMSL2-USB3.0 Conversion Kit
  • Knowledge Base
  • Downloads
  • TIER IV ADK
  • TIER IV

Section Navigation

  • 1. TIER IV Automotive HDR Camera Getting Started Guide
    • 1.1. Support List
    • 1.2. Installation Guide for NVIDIA Jetson AGX Orin Developer Kit
    • 1.3. Installation Guide for ADLINK RQX-59G
    • 1.4. Installation Guide for Vecow EAC-5000
    • 1.5. Installation Guide for Connect Tech Anvil
    • 1.6. Installation Guide for Syslogic RML-A4AGX
    • 1.7. Camera Operation and Configuration Guide
  • 2. Camera Control Tool User Manual (t4cam-ctrl)
  • 3. Hardware Reference Manuals
    • 3.1. C1 Camera Hardware Reference Manual
    • 3.2. C2 Camera Hardware Reference Manual
    • 3.3. C3 Camera Hardware Reference Manual
  • 4. FAQ
    • 4.1. Can I adjust the camera settings such as exposure, gain, and shutter speed?
    • 4.2. What are the options for C1 camera Field of View (FOV)?
    • 4.3. What are the options for C2 camera Field of View (FOV)?
    • 4.4. What is the camera size of C1 for each lens?
    • 4.5. What is the camera size of C2 for each lens?
    • 4.6. Can I change the frame rate?
    • 4.7. What is the shutter type?
    • 4.8. Does the camera have a zoom function?
    • 4.9. Can I switch the shutter mode between rolling and global?
    • 4.10. What’s the maximum length of the cable I can use?
    • 4.11. Can I use a different ECU other than the recommended one?
    • 4.12. What is the image delay from the camera to the ECU?
    • 4.13. Is it possible to communicate and supply power with PoE?
    • 4.14. Can I use the cameras with a USB interface?
    • 4.15. Is it compatible with PTP IEEE1588?
    • 4.16. How do I install the camera driver?
    • 4.17. How can I inquire about products and services?
    • 4.18. What should I do if the product is defective or malfunctions?
    • 4.19. What is the operating temperature range of the cameras?
    • 4.20. Is exterior CAD data available?
    • 4.21. What environmental standards do the cameras comply with?
    • 4.22. Can I use the C1 and C2 at the same time, with the same ECU?
    • 4.23. Can I use the Raspberry pi to receive the data from the TIER IV cameras by using GMSL2-USB3.0 converter?
    • 4.24. Can I fix the relationship between the GMSL port number and the device name?
    • 4.25. Some cameras don’t start streaming image when I connect multiple (for instance, 8) cameras. This happens occasionally
    • 4.26. I would like to know which ECU I can use with TIER IV cameras and from who I should get support.
    • 4.27. I can’t play videos in VLC media player
    • 4.28. Is it possible to obtain the internal parameters and distortion correction coefficients used during camera calibration from the camera?
    • 4.29. When using NVMe storage for root system(M.2 SSD)
    • 4.30. I see I2C write errors in kernel messages after driver installation
  • TIER IV Automotive HDR Camera
  • 4. FAQ
  • 4.11. Can I use a different ECU other than the recommended one?

4.11. Can I use a different ECU other than the recommended one?#

The cameras should work with other ECUs by modifying the camera driver.

The cameras can be used for various ECUs by using the GMSL2-USB3 conversion kit (sold separately).

previous

4.10. What’s the maximum length of the cable I can use?

next

4.12. What is the image delay from the camera to the ECU?
Last updated on 2026-06-15

© Copyright 2023, TIER IV.